TRIMUP PELLET

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Calibration of the application machine should be done before the application. The amount of mixture to be given to the specific area should be well adjusted in order to provide a good coating in the application. Applications should be done during the cool hours of the day under windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not perform washing operations beside water sources. Do not pour the washing water and waste into water sources.

THE USE OF THE PLANT PROTECTION PRODUCT:

Trimup pellet is formulated as an attractive and poisonous ready-made pellet feed for snails. Use without adding any additives. It can be used by hand or by spreading with fertilizer spreaders, and it can be used by wearing gloves and distributed only in clusters between the rows. Application should be done by moistening the soil in the evening hours. The feed is easily found by the target harmful organism, as it contains attractants.

INFORMATION ABOUT RESISTANCE:

Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications of trimup pellet recommended in the same production season.

MIXTURE STATUS:

It is not mixed with other plant protection products.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

Vomiting, abdominal pain, weakness in the legs, numbness, muscle stiffness, redness of the face and elevated body temperature.

FIRST AID MEASURES:

After inhalation: Move victim to fresh air. If breathing has stopped, clean the victim's airway and administer artificial respiration. If it is difficult to breathe, give oxygen. Call a doctor immediately.

After skin contact: Immediately wash the area contaminated with soap and warm water. Take off contaminated clothing. Wash clothes before reuse. If skin irritation occurs, consult a doctor immediately.

After eye contact: Immediately wash with plenty of clean, cold water for at least 15 minutes. Keep eyelids apart during washing. If irritation develops or persists, consult a doctor immediately.

After swallowing: If swallowed, immediately give 3-4 glasses of water. If vomiting occurs, give fluid again. Get medical attention immediately. Do not give anything by mouth to an unconscious patient.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE AND TREATMENT:

It has no special antidote. Treat according to symptoms Respiratory depressions can be prevented by giving appropriate stimulants and possible liver damage by giving Glocossalin, Calcium gluconate.

CONTENTS:

metaldehyde

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H332: Harmful if inhaled.

Precautionary Statements (P)

P261: Avoid breathing spray.

P264: Rinse well with water after use.

P270: Do not eat, drink or smoke when using this product.

P271: Use only outdoors or in a well-ventilated area.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P501 Dispose of contents / container duly.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

It is poisonous to bees.

- It is poisonous to the fish. Avoid getting into the waters.

-Keep the product closed in its packaging.

-Do not use empty packaging for any purpose. Dispose properly.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the plant protection product for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturer guarantees the quality of its products, provided that it is sold in its original packaging. The manufacturer is not responsible for any damage caused by improper storage, improper application, or misuse of the product.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

AcıdereOSB Mahallesi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: