Benidor M SC 240

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application tool should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not pour the washing water and waste into water sources.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field where plant protection products are applied for 4 hours.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

Rinse well by adding clean water up to 1/4 of the empty packaging of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

General Poisoning Symptoms Can Be Seen.

FIRST AID MEASURES:

After inhalation: Inhalation is brought to fresh air. Keep the patient warm and rest, not move. Consult a doctor immediately.

Skin contact: Skin should be washed immediately with plenty of water and soap. Consult a doctor immediately.

Eye contact: Rinse immediately with plenty of water, also under the eyelids, for 15 minutes. If the eyes have lenses, remove them at the end of the first 5 minutes, then continue washing the eyes. If irritation occurs and persists, go to your doctor.

If swallowed: The patient should not be vomited. The mouth should be thoroughly rinsed with water. Consult a doctor immediately.

NATIONAL POISON CONSULTING CENTER (UZEM): 114

CONTENTS:

spirodiclofen

HAZARDOUS SIGNS:

WARNING WORD: DANGER

HAZARDOUS EXPRESSIONS:

H302: Harmful if swallowed.

H317: Causes allergic skin reactions.

H351: Suspected of causing cancer.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in aquatic environments.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P):

P202: Do not handle until all precautionary statements are read and understood.

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P391: Collect spillages.

P405: Store locked up.

P501: Dispose of contents / container to national regulations.

EUH208: Contains Spirodiclofen. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to the bees, it should not be used during the flowering period.
• It is poisonous to fish, it should not be contaminated.
• Empty product packaging should not be used for any other purpose, it should be disposed of properly.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years within the limits of tolerance.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Citrus-pasböcsü: In the controls made every 7-8 days from the beginning of May, if 1-2 individuals are detected in the field of view (1 cm2) in 100 fruits, spraying should be done.

Citrus- Red spider: In the controls performed at the beginning of March, if an average of 4-9 live individuals are detected in 10 leaves, spraying should be done.

Apple- European Red Spider and Akdiken mite: Application should be done when an average of 8-10 live individuals per leaf is seen in the periodic counts to be made in 100 leaves from the beginning of May.

Cherry- Two-point red spider: Spraying should be done when an average of 3-5 live individuals per leaf are seen during garden controls. Applications should be made on fruitless trees or after harvest.

Ligament- Two-point red spider: Application should be done when 5-8 live individuals are seen per leaf

Peach- Two-point red spider: Spraying should be done in case of an average of 3-5 pieces of red spider per leaf in the counts.

INFORMATION ABOUT RESISTANCE:

Plant protection product named BENIDOR M SC 240 is an acaricide classified as Group 23 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of BENIDOR M SC 240 in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group 23). BENIDOR M SC 240 does not cross-resistant with known acaricides. To reduce the risk of endurance, recommended doses should be followed and no more than one application should be performed in one season.

MIXTURE STATUS:

The formulation of other products and especially the amount of solvent affects the mixture. For this reason, if the mixture is to be made, a pre-mixture test must be performed before the application.

ANTIDOTE AND TREATMENT:

If a sign of poisoning appears, symptomatic treatment should be applied, there is no known antidote.

NATIONAL POISON CONSULTING CENTER (UZEM): 114

COMPANY STATEMENT:

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage and incorrect application of plant protection products or lack of compliance with recommendations.

PLANT AND HARMFUL ORGANISMS THAT IT IS USED FOR:

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr