EKOPRID 600 FS

Explanation
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the application machine should be calibrated. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done during the cool hours of the day under windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Sugar beet; Due to the sensitivity of sugar beet seeds to humidity and to make a sensitive spraying, the volume of drug mixture to be applied in seed processing and spraying factories, which have professional spraying schemes, depends on the type of equipment, other substances entering the mixture and drying possibilities. Therefore, follow the instructions for available seed spraying equipment.

Egypt; Recommended amount for 100 kg of seeds; The drug is added to 1 liter of water and mixed thoroughly, half is added to the seed on nylon spread on a flat surface, then the other half is added and mixed well again. The same process is valid for cascade and spray canisters. After spraying, the seeds are laid and aerated. It should be planted immediately after the moisture is lowered.

INFORMATION ABOUT RESISTANCE:

Plant protection product named EKOPRID 600 FS is an insecticide classified as Group 4 A according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of EKOPRID 600 FS in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group 4 A).

MIXTURE STATUS:

It can be mixed with Thiram and Hymexazole based plant protection products. A premix trial is recommended. It is recommended to make preliminary mixture tests before making a large amount of mixture.

• Read the label first.
  Do not use it at home.
  Keep away from children, food and animal feeds.
  Do not eat, drink or smoke during the application of the plant protection product.
  Do not let people and animals enter the field for 1 day.
  To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
  It is strictly forbidden to use other than the recommended products.

  Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

  POISONING SYMPTOMS:

  Weakness, difficulty breathing, tremors, cramping in the muscles.

  FIRST AID MEASURES:

  After Inhalation; Take the patient to the open air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.

  In case of Skin Contact; Immediately take off the contaminated clothing. Wash the body parts that touch the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

  In Eye Contact; Immediately flush the eye under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

  If Swallowed; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE and TREATMENT:

It has no specific antidote. Treatment is applied according to the symptoms.

NATIONAL POISON CENTER (UZEM) TEL: 114

CONTENTS:

Imidacloprid, Soprophor 3s33, Red 2g Ac, Amersil B 30

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H317: Causes allergic skin reactions.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing dust / fume / gas / mist / vapors / spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P363: Wash contaminated clothing before reuse.

P391: Collect spillages.

P501: Dispose of contents / container in accordance with local regulations.

EUH208: Contains RED 2 G AC. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

Do not use seeds with plant protection products as food and feed.
Do not infect the streams.
This product is very toxic to bees. Especially in very dry and windy weather conditions, bees and other pollinator insects may be exposed to medicated seed dust, as the dust generated during application of medicated seeds can be carried by drift and form residues in the surrounding flowering plants and waters. For this reason, medicated seed sowing should not be done in very dry and windy weather conditions. Do not use in greenhouses where bumblebees are used for pollination.
It is poisonous to the fish. Avoid contaminating groundwater and groundwater.

STORAGE STATUS:

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: