GETAFE SC 125

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE APPLICATION MACHINE

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

For corn rotworm: When plants reach 20-30 cm, it is checked twice a week and applied with the detection of first eggs.

For cornworm: First application is made one week after the first egg package is seen by making checks in the same period, two or three applications are made with 15 days intervals.

For olive patrol: application should be done in the form of a summer struggle. The summer struggle should be done as the first application in the period when 50% of the female eggs are empty, and the second application in the period when 90% is empty.

For the olive fly: at the 10% of the fruit, when the fruit reaches the maturity of the eggs, at least 10% of the fruit is counted. In case of detection of larvae and eggs in the 3rd and 3rd periods, application should be made.

Olive moth: Application should be started for 10% and more damage in inflorescences against flower pollination, and 10% and more damage in fruits against fruit pollination.

INFORMATION ABOUT RESISTANCE

The plant protection product named GETAFE SC 125 is an insecticide classified as Group 3: A according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of GETAFE SC 125 in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (except Group 3: A).

MIXTURE STATUS

It is not used with plant protection products of alkaline properties. However, it is recommended to make a pre-mix test before mixing with other plant protection products.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

Irregularity in body movements, shortness of breath, numbness

FIRST AID MEASURES

IF INHALED: Remove patient to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately. (See Precautionary Statements P304 + P340)

In case of Skin Contact: Wash skin immediately with plenty of soap and water. If possible, it is cleaned with plenty of polyethylenglycol and water. Apply Vitamin-E cream or skin milk to the skin. (See Precautionary Statements P302 + P352)

In case of Eye Contact: Shake the eyes with plenty of warm water for at least 15 minutes. (See Precautionary Statements P305 + P351 + P338)

If Swallowed: The patient should not be vomited. The mouth should be rinsed with plenty of water. Consult a doctor immediately.

ANTIDOTE and TREATMENT

There is no specific antidote known. In case of poisoning, symptomatic treatment is applied.

NATIONAL POISON CENTER (UZEM) TEL: 114

CONTENTS

Beta-Cyfluthrin
HAZARDOUS EXPRESSIONS (H)

H300: Fatal if swallowed.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H330: Fatal if inhaled.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

EUH208: Contains 1,2-benzisothiazolin-3-one. May cause an allergic reaction.

Precautionary Statements (P)

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if they are attached and easy to do. Continue rinsing.

P403 + P233: Store in a well-ventilated area. Keep container tightly closed.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations

.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to bees. Do not use during the flowering period.
• It is poisonous to the fish. Avoid contaminating groundwater and groundwater.
• Use only in well-ventilated areas.
• Store in the original packaging.
• Keep containers tightly closed in a dry, cool and well-ventilated place.

STORAGE STATUS
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of plant protection products or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

It should be kept accessible for the bees.

PLANT AND HAZARDOUS ORGANISMS TO BE USED