MASSMECTIN

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The application machine tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration

Before the application, the calibration of the application machine should be done.
Mixing amount should be adjusted to provide a good coating in applications. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not pour the washing water and waste into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Ornamental Plants - Gallery: Spraying is started as soon as the first gallery signs are seen. If necessary, spraying can be repeated. There must be a minimum of 7 days between two sprayings.

Tomatoes, Pepper, Cucumber, Eggplant-Red Spiders: In tomatoes and peppers, spraying should be done when an average of 3 live individuals per leaf is seen on 20 leaves, and on cucumber and eggplant, an average of 5 live individuals per leaf is seen.

Cotton-Red Spider: Controls are made when the plants are 4-6 leaves in order to determine the fighting time. If the pest is found only locally or in the field, only these parts should be treated. Spraying should be done when 5 live red spiders are seen in the average Mediterranean Region per leaf and 10 live in the Aegean and South Eastern Anatolia Region.

Strawberry- Red Spider: Early application: When the red spiders are seen in the strawberry fields, flower and green fruit period (before the first ripe fruits are seen), single spraying is done. Early application is safer in terms of leaving no residue on fruits.

Seasonal application: In cases where early application is not made, strawberries grown in the open field are checked at the beginning of the season (end of March and beginning of April) with an interval of 3-5 days. Red spiders are seen in the surrounding plants at the beginning of the season in strawberries. First of all, it is sufficient to control and medicate these plants. If the population is widespread, at least 50 leaflets are examined from the middle and lower parts of the plants to represent the field. If 15 or more red spider is detected per leaflet, it is decided to spray it. Spraying is done immediately after fruit collection. Harvest should be done by paying attention to the time between the last spraying and harvest.

INFORMATION ABOUT RESISTANCE

The plant protection product named MASSMECTIN is an insecticide - acaricide classified as Group 6 according to the mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of MASSMECTIN in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except for Group 6).

MIXTURE STATUS

Mixing with other plant protection products should be tried beforehand. It does not mix with alkaline reaction plant protection products.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times

POISONING SYMPTOMS

It causes growth in pupils, impaired concentration in muscles and contraction in muscles.

FIRST AID MEASURES

In case of inhalation; Take the patient to the open air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.

In case of Skin Contact; Immediately take off the contaminated clothing. Wash the body parts that touch the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

In Eye Contact; Immediately flush eyes and under eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

If Swallowed; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE and TREATMENT

It has no special antidote. Symptomatic therapy is applied. In case of poisoning, the patient should be vomited within 30 minutes. Medical coal should be given. Drugs that accelerate Gaba (Barbitual, Benzodiazepine, Valpropic acid) should not be given.

CONTENTS

the Abamectin

HAZARDOUS EXPRESSIONS (H)

H226: Flammable liquid and vapor.

H300: Fatal if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H318: Causes serious eye damage.

H330: Fatal if inhaled.

H336: May cause drowsiness or dizziness.

H361d: Suspected of causing damage to the unborn child.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P210: Keep away from heat / sparks / flames / hot surfaces. - No smoking

P273: Avoid release to the environment.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P303 + 361 + 353: IF ON SKIN (or hair): Immediately remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if they are attached and easy to do. Continue rinsing.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• Store in a closed herbal product packaging.
• Never use empty packaging for any other purpose.
• Do not put plant protection products in empty food and beverage cans.
• It is poisonous to bees. Do not use the flowering time.
• It is poisonous to the fish. Avoid contaminating groundwater and groundwater.
• Since the product is combustible, keep it away from fire.
• Do not apply in windy weather.
• Observe the waiting time.
• If spilled, sand, soil etc. sprinkle with absorbent materials such as, then sweep and destroy.

STORAGE STATUS

In normal (cool and dry) conditions, when stored unopened in its original packaging, there is no change in the physical, chemical and biological properties of the plant protection product for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for damages that may occur as a result of faulty storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HARMFUL ORGANISMS USED