PASCAL 20 SP

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done during the cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

THE USE OF PLANT PROTECTION PRODUCTS:

Tobacco whitefly in cotton: When considering the white fly density, the fight should be started when there are 10 larvae + pupae per leaf.

Cotton aphid: Application should be postponed if beneficial insects are dense with aphid in field controls. Application is recommended when 50% dish seedling is detected after dilution during seedling period and an average of 25 aphids per leaf in field.

Leaf fleas in cotton: A cotton field of 50 da in surveys is divided into 4 sections. Leaf fleas are counted in all 25 leaves, 1 of which is taken from the lower, middle and upper part of the main stem of the plants randomly selected from each section. In this way, the average number of pests per leaf is found in a total of 100 leaves from the entire area. When an average of 10 leaf fleas are detected per leaf, application is performed.

Potato beetle; When the daily average temperature reaches 14-15 C, it is entered in the field in the direction of its diagonals, and the pest's eggs, larvae and adults are sought in the quarries. Having any period indicates that the field is dishwasher. If the application is to be made against the first generation, it should be done when the first mature larvae (fourth period) are seen in the plants. In case of application to the second batch, the egg opening should be completed. In this period, application may not be necessary as the damage due to insect density can be tolerated by the plant. However, as a result of the researches, the 20% damage caused by the potato beetle on the leaves of the potato plant can be tolerated by the plant and there is no reduction in the product. This rate rises up to 40% depending on the phenological period and development of the plant.

Tobacco whitefly in tomato: It is entered in the field in terms of diagonals, which is found to be contaminated with a white fly. In every 5 steps, 50 leaves are collected from the lower, middle and upper leaves. Chemical combat is applied when there are 5 larvae-pupae per leaf.

Pistachio psillid: Application should be done when 20-30 nymphs are seen per leaf as a result of counts made in 100 compound leaves weekly, when the majority of eggs are opened and before the first adult parasitoid exit and adhesive layer (fumajin) on the leaf surface.

Green aphid on apple; If there are dishes in 15 out of 100 shoots during the vegetation period, application should be done.

Peach aphid in watermelon and pepper (Greenhouse); For sampling, a grain field of 40-50 decares is accepted as one unit. In the units, the zigzag is walked in line with the diagonals of the field, and the adult and nymphs of the pest are searched and counted in all the above-ground organs every 10-15 m. Survey is done 1-2 times a week. Considering the results of the survey on the aphids and the density of natural enemies, it is decided whether or not to struggle within the framework of the cooperation between the relevant research institutes and the provincial directorates of Agriculture.

INFORMATION ABOUT RESISTANCE

The plant protection product named PASCAL 20 SP is an insecticide classified as Group 4: A according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications recommended in the same season of PASCAL 20 SP. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (except Group 4: A).

MIXTURE STATUS

It is not used with plant protection products of alkaline properties. However, it is recommended to make a pre-mix test before mixing with other plant protection products.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the area where plant protection products are applied for 7 days.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

It is strictly forbidden to use other than the recommended products.

POISONING SYMPTOMS

Drowsiness, muscle contractions, imbalance, difficulty breathing, increased tears and snot.

FIRST AID MEASURES

In Case of Skin Contact: See - Precautionary Statements (P302 + P352)

In Eye Contact: See - Precautionary Statements (P305 + P351 + P338)

IF INHALED: Remove patient to fresh air. If exhalation is uneven or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.

If Swallowed: If swallowed, seek medical advice with the product label or this information sheet. Encourage vomiting by drinking one / two glasses of water or milk. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE and TREATMENT

It has no special antidote. Symptomatic therapy is applied.

NATIONAL POISON CENTER (UZEM) TEL: 114

CONTENTS

Acetamiprid, Sodium salt of polynaphthalene, sulphonic acid

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H319: Causes serious eye irritation.

H412: Long lasting, harmful effect in aquatic environment.

Precautionary Statements (P)

P270: Do not eat, drink or smoke when using this product.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if they are attached and easy to do. Continue rinsing.

P363: Wash contaminated clothing before reuse.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to bees. Do not use the flowering time
• It is poisonous to the fish. Do not contaminate the waters.
• Store in cool and dry places in its original packaging.
• Do not use empty plant protection product packages for any other purpose.

STORAGE STATUS

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for damage caused by improper storage of plant protection products or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Organize Sanayi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED