ERTAR AMİN 500 SL

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The sprayer tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. The amount of water to be used per decare should be 20-40 liters, and fan jet nozzle should be used in applications. The prepared mixture should be used on the same day. Applications should be done in cool hours of the day, in windless or less windy weather conditions.

Calibration:

Calibration of the sprayer must be done before the application. The tank of the sprayer is filled with water to determine the amount of water to be used per decare. With this water, how much area is wetted is determined and the amount of water to be used in the application is calculated.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

When ERTAR AMİN 500 SL is used in the period when weeds grow rapidly, the best results are obtained. Do not apply if the temperature is lower than 10-12oC.

RESISTANCE MANAGEMENT:

Plant protection product named ERTAR AMİN 500 SL is a herbicide classified as Group O, 4 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of ERTAR AMİN 500 SL in the same production season. In cases where the application needs to be repeated, pay attention to the use of plant protection products with different mechanism of action (except Group O, 4).

MIXTURE STATUS

It can be mixed with liquid leaf fertilizers. It is recommended to make preliminary mixture tests before making a large amount of mixture for application.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people or animals enter the field where plant protection products are applied for 14 days.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS

When the plant protection product is taken orally, vomiting, diarrhea, decreased reflexes, and irregularities in body activities are observed. Pulse beats fast, death may occur in some cases. In experiments on animals, liver and kidneys were damaged. The plots can be seen on the leather it touches.

FIRST AID MEASURES

After Inhalation: If inhaled, remove source of contamination, or leave contaminated area as soon as possible and escape to fresh air.

After Skin Contact: If irritation occurs, remove dirty clothing, shoes, and leather goods (eg belts, watch straps). Gently wipe off excess chemical. Wash gently and thoroughly with water and non-abrasive soap. If irritation persists, consult a doctor immediately.

After Eye Contact: Immediately flush eyes with warm running water or brine solution for 15 minutes, keeping eyelids open. Get medical attention.

After Swallowing: If swallowed, seek medical advice with a product label or information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

2,4-D Acid
HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P301 + P312: IF SWALLOWED: Call the POISON CENTER or doctor / doctor if you feel unwell.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P362: Take off contaminated clothing and wash it before reuse.

P501: Dispose of contents / container in accordance with local regulations.

EUH208: Contains 2,4-D DMA salt. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to bees. Do not apply the flowering time.
• It is poisonous to fish, avoid contaminating groundwater and surface waters.
• Since the product is harmful to cultivated plants other than grain, care should be taken to prevent the medicinal product or its vapor from phytotoxic effect to the surrounding plants.
• The application should be interrupted when the wind speed is more than 16 km / h.
• The air temperature should be between 10-25 oC during the application.
• If it rains within 6 hours after the application, the application should be repeated.
• Do not apply on cloudy days in closed weather where dew is expected or rain is expected after frost or long dry periods.
• Diabetics should not be employed in the practice job.
• After the application, the application tool should be cleaned thoroughly.
• The product should be kept in its package and closed.

STORAGE STATUS

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Organize Sanayi Mahallesi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS FOR USING PLANT PROTECTION: