FİRENZE SC 400

Explanation
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. The prepared plant protection product should be used on the same day. The amount of water to be used per decare should be 20-40 liters, and fan jet nozzle should be used in applications.

Calibration:

Before the application, the calibration of the application machine should be done. Mixing amount should be adjusted to provide a good coating in applications. Applications should be done during the cool hours of the day under windless or less windy weather conditions.

CLEANING OF THE APPLICATION MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

FİRENZE SC 400 is used with special surfactant. In order to get good results from the application, leveling the field and keeping the water level low after planting is necessary since weeds will grow at the same level. The waters in the field must be drained one day before the application. 2-3 days after the application, water is given to the pans again and this water is kept at a high level in the pans for at least 3 days.

RESISTANCE MANAGEMENT:

The plant protection product named FIRENZE SC 400 is a herbicide classified as Group B, 2 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of FIRENZE SC 400 in the same production season. In cases where the application needs to be repeated, pay attention to the use of plant protection products with different mechanism of action (except Group B, 2).

MIXTURE STATUS:

It is not recommended to mix with other plant protection products. If a mixture is needed, a pre-mix test is recommended.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• There is no harm in entering the field where the plant protection product has been applied after the product has dried on the plant.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF RECOMMENDED PRODUCTS ARE ABSOLUTELY FORBIDDEN.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

General signs of poisoning may be seen. Vomiting, dizziness, diarrhea etc.

FIRST AID MEASURES:

After Inhalation: Remove person to fresh air; If not breathing, call an emergency center or an ambulance and give artificial respiration. If artificial respiration is to be delivered from mouth to mouth, the practitioner should use rescuer protection (pocket mask, etc.). Consult the poison counseling center or doctor for treatment recommendations.

After Skin Contact: Skin should be washed immediately with plenty of water and soap, if any, should be washed with polyethylene glycol 400 followed by plenty of water.

After Eye Contact: In case of contact with eyes, remove contact lenses, rinse eyes, including under the eyelids, with plenty of water for at least 15 minutes. Consult a doctor or poison control center.

After Swallowing: If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE and TREATMENT:

It has no special antidote. Symptom agile treatment is applied.

CONTENTS:

Bispyribac-sodium

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P391: Collect spillages.

P501: Dispose of contents / container in accordance with local regulations.

EUH208: Contains Bispyribac-sodium. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to bees. Do not apply the flowering time.
• It is poisonous to fish, avoid contaminating underground and surface waters.
• Shake the bottle well before use.
• Do not forget to add surfactant to the product.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mahallesi No: 8 Sarıçam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS FOR USING PLANT PROTECTION: