MISKET 200 SL

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The sprayer tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. The amount of water to be used per decare should be 20-40 liters, and fan jet nozzle should be used in applications. The prepared mixture should be used on the same day. Applications should be done in cool hours of the day, in windless or less windy weather conditions.

CALIBRATION:

Before the application, the calibration of the application machine should be done. The tank of the sprayer is filled with water to determine the amount of water to be used per decare. With this water, how much area is wetted is determined and the amount of water to be used in the application is calculated.

CLEANING OF THE SPRAYING MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

USAGE OF PLANT PROTECTION PRODUCT:

The best result from application is obtained in young periods when green parts are abundant and weeds are actively developing. Spraying should be done with 20-40 liters of water per decare, with low pressure tools and using fan-jet nozzles. The drug should not come into contact with the green parts of the cultivated plants and the green pods of the young saplings that have not yet been lightened. Since the effect of the drug is systemic, the soil tillage that will damage the weeds should not be done before 4 to 5 days after the application, in order not to decrease the effect of the drug.

INFORMATION ABOUT RESISTANCE:

The plant protection product named MISKET 200 SL is a herbicide classified as Group H according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended in the same season of MISKET 200 SL. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except group H).

MIXTURE STATUS:

It is not recommended to mix with other plant protection products. If a mixture is needed, premix test should be done.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Use a mask, protective suit, gloves and goggles.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not introduce people and animals to the field where plant protection products are applied
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

It is strictly forbidden to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the spraying tank. Repeat this process 3 times.

POISONING SYMPTOMS:

May cause dizziness and headache.

FIRST AID MEASURES:

In case of poisoning, take the first aid measures mentioned below, call a doctor, take the package or label of the plant protection product together.

In case of Skin Contact; Immediately take off the contaminated clothing. Wash the body parts of the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

In Eye Contact; Immediately flush the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

In case of inhalation; Remove to fresh air. Keep the patient warm and rest. If symptoms persist, consult a doctor.

If Swallowed; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE and TREATMENT:

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS:

1.Glufosinateammonium salt

HAZARDOUS EXPRESSIONS (H):

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H318: Causes serious eye damage.

H332: Harmful if inhaled.

H360Fd: May damage fertility. There is a suspicion of causing damage to the unborn child.

H373: May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements (P):

P201: Read special instructions before use.

P202: Do not handle until all precautionary statements are read and understood.

P271: Use only outdoors or in a well-ventilated area.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• Store the medicine in its sealed packaging, separate from feed and foodstuffs, in a locked, well-ventilated, cool and dry place. Do not store above + 350C. Protect from frost.
• It is poisonous to bees, do not use flowering time,
• It is poisonous to fish, do not contaminate underground and surface waters.
• Spraying should not be done in windy weather and with high pressure tools. Do not use zinc and galvanized metal containers in the preparation and storage of the drug. Use clean water for spraying.
• Do not use empty medicine packages for any other purpose.
• Because it is a total herbicide, it is phytotoxic to all cultivated plants.

STORAGE STATUS:

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mahallesi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANTS AND FOREIGN HERBS TO USE THE PLANT PROTECTION PRODUCT: