Banker 25 EC

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE APPLICATION MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Apple crumble:

Application: when the flower is blindfolded (3-5 days before where there is a branch heat)
Application: in the pink rosette bud period (when flowers appear separately)
Application: When the flower petals fall 70-80%
and other application: When the climatic conditions are suitable for the progression of the disease, it should be done with 15 days intervals.
Pear crumble:

Application: when the flower is blindfolded (3-5 days before where there is a branch heat)
Application: During the white badge period
3 Application: When the flower petals fall 70-80%

and other application: Where the climatic conditions are suitable for the progression of the disease, it should be done with an interval of 10 days.
Sugar beet leaf spot disease:

The first application is started when 5% of the adult leaves of sugar beet have a cercospora leaf spot. It should be continued at intervals of 15-20 days.

Sugar beet powdery mildew:

When symptoms of the disease are seen, application is started and continued with an interval of 20 days depending on the need.

INFORMATION ABOUT RESISTANCE

The plant protection product named BANKER 25 EC is a fungicide classified as Group G1: 3 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications of BANKER 25 EC recommended in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group G1: 3).

MIXTURE STATUS

BANKER 25 EC is not affected by plant protection products applied before it or used as a tank mixture. If necessary, a premix trial is recommended.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

Rinse thoroughly by putting clean water up to ¼ in the empty packaging of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS

General signs of poisoning may appear. Headache, nausea, etc.

FIRST AID MEASURES

After Inhalation: Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient warm and at rest. Call a doctor or Poison Control Center immediately.

After Skin Contact: Take off contaminated clothing immediately. Wash with plenty of water. If skin irritation persists, consult a doctor. Wash contaminated clothing before reuse.

After Eye Contact: Flush eyes with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Emergency medical attention is required.

After Swallowing: If swallowed, seek medical advice immediately and show the product container or label. Do not induce vomiting. Contains petroleum distilleries and / or aromatic solvents.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

Difenoconazole
HAZARDOUS EXPRESSIONS (H)

H226: Flammable liquid and vapor.

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H318: Causes serious eye damage.

H319: Causes serious eye irritation.

H332: Harmful if inhaled.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P210: Keep away from heat / sparks / flames / hot surfaces. - No smoking.

P280: Wear protective gloves / protective clothing, eye protection / face protection.

P303 + P361 + P353: IF ON SKIN (or hair): Immediately remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to fish, do not contaminate it.
• It is poisonous to the bees, do not use the time of flowering.
• Do not pollute stagnant or stream sources used in irrigation and drinking during the disposal of plant protection product residues.
• In the new application area, animals should not be grazed, feed and food should not be collected, pets should be kept away from here.
• Store the plant protection product in its original packaging, closed, away from feed and food, locked, well ventilated, away from the sun and moisture.

STORAGE STATUS

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the mixture outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED