COLONY 2 DS

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

USAGE OF PLANT PROTECTION PRODUCT:

If the application is to be applied with a cask (cascade), 150 g of the product recommended for 100 kg of seeds are added to the application barrel several times in a container after mixing well with enough water in a container. coating is provided.

On the other hand, the selectors with application equipment contain the amount of water that will ensure the ideal coating of the seed by conducting a preliminary trial. The ideal amount of water is the amount of water that covers the seed but does not flow. After this is achieved, the required amount is mixed thoroughly with water and the application device is placed in the tank and applied. Do not use seeds with low germination capacity, peeled or cracked, not suitable for planting. Seed application equipment can be a problem at temperatures below very cold (0 ° C). (Colony 2 DS) It should be applied at temperatures above 0 ° C.

INFORMATION ABOUT RESISTANCE:

The plant protection product named COLONY 2 DS is a fungicide classified as Group G1: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of COLONY 2 DS in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group G1: 3).

MIXTURE STATUS:

It should be used alone.

• Read the label first.
• Do not use it at home.
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To avoid risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

POISONING SYMPTOMS:

General signs of poisoning may appear. Difficulty in breathing and moving, cramps, etc.

FIRST AID MEASURES:

After Inhalation: Move patient to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.

After Skin Contact: Immediately take off any contaminated clothing. Wash the body parts of the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

After Swallowing: If swallowed, seek medical advice immediately with the product label or this information sheet. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE AND TREATMENT:

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS:

1.Tebuconazol to

HAZARDOUS EXPRESSIONS (H):

H302: Harmful if swallowed.

H304: May be fatal if inhaled and swallowed.

H314: Causes severe skin burns and eye damage.

H315: Causes skin irritation.

H319: Causes serious eye irritation.

H332: Harmful if inhaled.

H350: May cause cancer.

H361: Suspected of causing damage or reproductive damage to the unborn child.

H372: Causes damage to organs through prolonged or repeated exposure.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P):

P202: Do not handle until all precautionary statements are read and understood.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to bees. Do not use during the flowering period.
• It is poisonous to the fish. Avoid getting into the waters.
• Do not smoke or drink in any way while using the plant protection product.
• Do not use seed with plant protection product as food and animal feed.
• Use eye protection.
• Wear synthetic rubber gloves.
• Dispose of empty packages properly and do not use them for any other purpose.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of plant protection products or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: