COPCİDE WP

Explanation
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. Medicated water is added to the tank while the mixer of the machine is running. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

CALIBRATION: Before application, calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE APPLICATION MACHINE:

Immediately after the application is completed, safely empty the application machine's tank. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

USAGE OF PLANT PROTECTION PRODUCT:

Cucurbitaceae:

Spraying is started when the plants start to throw arms or with the first symptoms of mildew and it is continued at 7-10 days intervals depending on the severity of the disease. Spraying should be done to cover all parts of the plant, especially under leaves.

vineyard MİLDİYÖ:

The first application should be started when the shoots reach 25-30 cm. Second and subsequent sprayings 1. The duration of the drug and the condition of the disease and the meteorological factors are taken into account for 1015 days.

POTATO MILLION:

Spraying is started when climatic conditions such as high humidity occur for the disease outlet or with the first symptoms of the disease in the environment and it is repeated at 10-12 day intervals depending on the severity of the disease.

ONION MİLDİYÖ:

If the daily average temperature reaches 16oC and it is necessary to start struggling with the proportional humidity reaching 80%, spraying can be started with the detection of the first signs of disease in the environment.

TOMATO MILLION:

Medicated control is started with the appearance of white ash under 3-5 mm diameter brown spots on the surrounding tomato leaves or in places where the disease appears every year, when suitable conditions are seen for the disease. Depending on the course of the disease and climatic conditions, spraying is continued at 10-12 day intervals.

INFORMATION ABOUT RESISTANCE:

Plant protection product named DAGOS MZ, Group M3 according to the mechanism of action; It is a fungicide classified as H5: 40. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications of DAGOS MZ recommended during the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except for Group M3; H5: 40).

MIXTURE STATUS:

If it is desired to be mixed with other drugs, first a pre-mixture experiment should be made and it should be ensured that the plant is not damaged, and the mixing process should be done immediately before use.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Use a mask, protective suit, gloves and goggles.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

POISONING SYMPTOMS

It may cause itching and irritation on eyes, skin and mucous membranes.

FIRST AID MEASURES

In case of Skin Contact: After contact with skin, wash with soap and water. If irritation occurs, seek medical attention.

In case of Eye Contact: Immediately flush affected eyes for at least 15 minutes, keeping the eyelids open, consult an ophthalmologist.

Inhalation: Calm patient, remove to fresh air and seek medical attention.

If Swallowed: Immediately rinse your mouth and then drink plenty of water, seek medical attention. Do not induce vomiting unless instructed by a poison center or doctor. If the victim is unconscious, never try to induce vomiting and give nothing by mouth.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

Mancozeb
dimethomorph
HAZARDOUS EXPRESSIONS (H)

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H361d: Suspected of causing damage to the unborn child.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P)

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P301 + P330 + P331: IF SWALLOWED: rinse your mouth. DO NOT try to abuse it.

P303 + 361 + 353: IF ON SKIN (or hair): Immediately remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P403 + P233: Store in a well-ventilated area. Keep container tightly closed.

P501 Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is harmful to fish and aquatic life. Do not contaminate the waters.
• At recommended doses, it is not phytotoxic to cultivated plants.
• Store the medicine in its original packaging, closed, away from feed and food, in locked, well-ventilated, dry and cool places. Do not store at temperatures above + 35 lardaC.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.

COMPANY STATEMENT

The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Haci Sabanci Organize Sanayi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: