IMPALA WG

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The application machine tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration

Before the application, the calibration of the application machine should be done.
Mixing amount should be adjusted to provide a good coating in applications. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Vineyard mildew: The first application should be started when the shoots reach 25-30 cm. Second and subsequent applications 1. Duration of application and development of the disease are applied with an interval of 10-15 days considering the meteorological factors.

Tomato mildew: It is started to be sprayed with the fight against medication with the appearance of white ash under 3-5 mm diameter brown spots on the surrounding tomato leaves or in places where the disease appears every year, when the conditions are suitable for the disease. Depending on the course of the disease and climatic conditions, disinfection is continued at 7-10 days intervals.

Mildew in cucumber, zucchini, melon and watermelon cucurbit: Disinfestation is started with the application of spraying plants or when the first sign of mildew is seen. Disinfection is continued at 7-10 days intervals, taking into account the severity of the disease, climatic conditions and duration of the drug.

Watermelon (Sera) alternarya leaf blight: Spraying should be started with the first symptoms seen in the environment. Disinfection is continued at 7-10 days intervals, taking into account the severity of the disease, climatic conditions and duration of the drug.

Potato mildew: Spraying is started when climatic conditions such as high humidity occur for the disease outlet or when the first symptoms of the disease are seen in the environment and the application is repeated at 10-day intervals depending on the severity of the disease.

INFORMATION ABOUT RESISTANCE

The plant protection product named IMPALA WG is a fungicide classified as external to Group M3: 27 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended in the same season of IMPALA WG. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M3: 27).

MIXTURE STATUS

It is recommended to make a pre-mix test before mixing with other plant protection products. Mixtures should be used without waiting.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

POISONING SYMPTOMS

Headache, nausea and weakness.

FIRST AID MEASURES

After Inhalation: Keep patient in warm and fresh air, seek medical attention.

After Skin Contact: In case of contact with skin, wash with plenty of water and soap, if any damage, get medical attention.

After Eye Contact: Wash affected areas in a stream for at least 15 minutes without closing your eyelids, see an ophthalmologist.

After Swallowing: Immediately rinse your mouth with water and seek medical attention for plenty of water.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

I 1.Metira

2.Cymoxanil

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H361fd: Suspected of damaging fertility. There is a suspicion of causing damage to the unborn child.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment

.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P312: Call the POISON CENTER or doctor / doctor if you feel unwell.

P391: Collect spillages.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to fish and aquatic creatures, do not infect natural water sources.
• Do not use empty plant protection product packaging for other purposes.
• In order to get a good result from the application, follow the application recommendations.
• It is poisonous to bees. Do not use during the flowering period.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED

(*) Cannot be used in vineyards where harvest leaves will be harvested.