MASHONA 50 SC

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. Medicated water is added to the tank while the mixer of the machine is running. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Apple crumple: If there is no branch heat 1. Spraying when the flower eyes are blistering 2. Spraying during the pink rosette bud (when the flowers are seen separately) 3. Spraying the flower petals 70-80% spill 4. And other sprayings when the ecological conditions are suitable for the progression of the disease. According to the 10 days interval.

Cucurbitaceae mildew: The application is started when the plants start to throw arms or with the first mildew symptom and it is continued at 7-10 days intervals depending on the severity of the disease. Applications should be made to cover all parts of the plant, especially under the leaves.

Leaf beetle disease in sugar beet: Sugar beet is started in 5% of adult leaves when the cercospora leaf spot is seen. It should be continued at intervals of 15-20 days.

Tomato mildew: Spraying is started with the appearance of 3-5 mm brown spots on the leaves of the tomato on the underside of the cone cover, such as white ash.

Apricot prickle: 1st spraying: immediately after leaf fall in autumn

2. spraying: before the flower buds open in the spring.

3. Placing: It should be done while the leaf and male organ plate are peeled on the tip of the fruit.

INFORMATION ABOUT RESISTANCE

Plant protection product named MASHONA 50 SC is a fungicide classified as Group M: 5 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications recommended in the same season of MASHONA 50 SC. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M: 5).

MIXTURE STATUS

It should not be mixed with strong alkalis like burgundy slurry. It is recommended to monitor the mixture and the application and then put them into practice while mixing with other drugs such as EM in different formulations. It is not recommended to be mixed with surfactants or leaf fertilizers. It is not recommended to mix with more than two pesticides. A preliminary trial is required for the mixture.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 3 days.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.
• Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS

In case of contact with eyes and open skin areas, temporary allergic side effects may occur in the form of redness and mild irritation of the bronchi.

FIRST AID MEASURES:

After Inhalation: If inhaled, remove to fresh air and rest. Get medical attention.

After Skin Contact: Carefully remove contaminated clothing. Wash affected areas with soap and water. If irritation persists, get medical attention.

After Eye Contact: Rinse with clean water for at least 15 minutes and seek medical advice.

After Swallowing: Rinse mouth with water. Do not induce vomiting. Give a glass of water. Keep the patient at rest and seek emergency medical attention.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment with antihistamines or steroid pomades or systemic steroids is recommended for the treatment of irritations.

CONTENTS

1.Chlorothalonil

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H330: Fatal if inhaled.

H335: May cause respiratory irritation.

H351: Suspected of causing cancer.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

EUH208: Contains Chlorothalonil. May cause an allergic reaction.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P261: Avoid breathing spray.

P270: Do not eat, drink or smoke when using this product.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P312: Call the POISON CENTER or doctor / doctor if you feel unwell.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to the fish. Avoid contaminating groundwater and groundwater.
• Do not contaminate plant protection product wastes into streams, lakes, pond waters and fountain troughs.
• It is poisonous to bees. Do not use the flowering time.
• Store in cool, dry warehouses that are not too hot.
• Do not use empty plant protection product packages for any other purpose.
• Wear a mask that covers your mouth and nose while working with the product.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED