MASS TRI FORTE

Explanation
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

USAGE OF PLANT PROTECTION PRODUCT:

vineyard MİLDİYÖ: The first application should be started when the shoots reach 25-30 cm. Second and subsequent applications The duration of the first application and the development of the disease are applied with an interval of 10-12 days considering the meteorological factors.

TOMATO MİLDİYÖ: It is started to be applied to the struggle with crop protection products with the appearance of white ash under the 3-5 mm diameter brown spots on the tomato leaves in the surrounding area, or in places where the disease appears every year, when suitable conditions for the disease are seen. The application is continued at 7-10 day intervals depending on the course of the disease and climatic conditions.

TOMATO EARLY LEAF BURN: Application should be started as soon as the first spots appear on both seedlings and field. When the climatic conditions are suitable for disease development, the application should be repeated depending on the duration of the product.

TOMATO BACTERIAL SPOT DISEASE: As soon as the disease is seen in seedlings or field in the form of green parts application, 2-3 applications should be done once a week during the seedling period and 8-10 days apart in the field.

POTATO MİLDİYÖ: When the climatic conditions such as high humidity occur for the disease outlet or the first symptoms of the disease appear in the environment, the application is repeated at 10-day intervals depending on the severity of the disease.

Cucurbitaceae MILLIOS: The application starts when the plants start to throw arms or with the first sign of the milliona and the application should be done in a way to cover all parts of the plant, especially under the leaves.

RELATIONSHIP WITH RESISTANCE

Plant protection product named MASS TRI FORTE is a fungicide classified as Group M1: M3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended by MASS TRI FORTE in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (except group M1: M3).

MIXTURE STATUS

It cannot be recommended with alkaline plant protection products and products containing mercury. It does not mix with triazoles. We recommend the farmer to try a premix at his own expense and responsibility. The mixture should be used on the day it is prepared. The reactions in the plant should be monitored in the following days.

• Read the label first.
• Do not use it at home.
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

POISONING SYMPTOMS

When the plant protection product is swallowed in large quantities; nausea, blue-green color sometimes bloody vomiting, abdominal pain numbness, anorexia, weight loss, dizziness. In severe cases, dehydration, anemia, and blood disorders may occur.

FIRST AID MEASURES

After Inhalation: Remove error to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Contact a doctor or poison information center immediately.

After Skin Contact: Immediately take off contaminated clothing. Wash the body parts touching the product with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

After Swallowing: If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

CONTENTS

Mancozeb

Copper salts equivalent to metallic copper (Bordeaux slurry + bacyroxychloride +

copper carbonate)

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H332: Harmful if inhaled.

H361d: The unborn child has the suspicion of causing damage.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P304 + P340: IF INHALED: If breathing is difficult to take, bring the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYE CONTACT: Rinse carefully with water for several minutes. Remove contact lenses, if fitted and easy to do. Continue rinsing.

P405: Store locked up

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to the fish. Do not contaminate underground and surface waters.
• It is poisonous to bees. Do not use the flowering time.
• Keep the product closed in its special packaging.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

Manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Sanayi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 4561945 Fax: 0 (322) 4561947

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED

(*) It is not used in vineyards where harvesting vine leaves will be harvested.