Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Calibration
Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF THE SPRAYING MACHINE
Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
The plant protection product named MASSCAN 79 is a fungicide classified as Group M3-A1; 4 according to the mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended in the same season of MASSCAN 79. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (Group M3-A1; 4 external).
MIXTURE STATUS:
The fungicide used in the specified crops can be mixed with most of the insecticide, acaricide and plant food preparations. In case of hesitation, a preliminary physical miscibility test should be carried out.
POISONING SYMPTOMS
General signs of poisoning may appear. Headache, dizziness, vomiting, etc.
FIRST AID MEASURES
In case of inhalation; Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.
In case of Skin Contact; Wash skin affected by soap and water. If irritation persists, consult a doctor. Take off contaminated clothing and wash thoroughly.
In Eye Contact; Wash off with water. If irritation persists, consult a doctor.
If Swallowed; If swallowed, give 2 glasses of water to drink. Consult a doctor. Never give anything by mouth to an unconscious person.
ANTIDOTE and TREATMENT
It has no special antidote. If necessary, treatment is applied according to the symptoms.
CONTENTS
Mancozeb
metalaxyl
HAZARDOUS EXPRESSIONS (H)
H302: Harmful if swallowed.
H315: Causes skin irritation.
H317: Causes allergic skin reactions.
H318: Causes serious eye damage.
H332: Harmful if inhaled.
H361d: Suspected of causing damage to the unborn child.
H400: Very toxic in the aquatic environment.
H412: Long lasting, harmful effect in aquatic environment.
Precautionary Statements (P)
P202: Do not handle until all precautionary statements are read and understood.
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P391: Collect spillages.
P501 Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
STORAGE STATUS
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.
COMPANY STATEMENT
The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for damage caused by improper storage of plant protection products or deficiencies in following recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47
info@ertarkimya.com.tr www.ertarkimya.com.tr
PLANT AND HAZARDOUS ORGANISMS TO BE USED
Plant Name | Harmful Organism Name | Administration dose | Time Between Last Application and Harvest |
vineyard * | Vineyard Mildew
(Plasmopara viticola) |
250 g/100 Lwater | 14 day |
Cucumber | Mildew in Cucurbitaceae
(Pseudoperonospora cubensis) |
250 g/100 L water | 7 day |
Potato | Potato mildew
(Phytophthora infestans) |
250 g/da | 14 day |
(*) It is not used in vineyards where harvesting vine leaves will be harvested.
Sosyal Ağ