Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, mixed water is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Calibration:
Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF THE SPRAYING TOOL:
Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
HOW TO USE THE PLANT PROTECTION PRODUCT:
Apple crumb: Application 1: When the flower eyes are blistering (3-5 days before where there is a branch order)
Application 2: During the pink rosette bud (when the flowers are seen separately)
Application: When the flower petals fall 70-80%
4. And other Applications, on the other hand, should be applied taking into account the duration of action of the plant protection products used when the climatic conditions are suitable for the progression of the disease.
Apple mammal paste: 1.Application: After the flower buds burst (at the beginning of the red rosette period)
2. Application: When the flower petals are completely shed.
Application: It should be done 15 days after the 2nd application.
Vineyard mildew: The first application should be started when the shoots reach 25-30 cm. Second and subsequent applications 1. Duration of application and development of the disease are applied with an interval of 10-15 days considering the meteorological factors.
Vineyard duct: * Summer Application:
1.When the application shoots are 2-3 cm,
2.When the application shoots are 8-10 cm,
3. Application shoots should be made in the circuit where it reaches 25-30 cm.
Onion mildew: If the daily average temperature reaches 16 C and 80% of the proportional humidity needs to be started, applications can be started with the detection of the first signs of disease in the environment.
Cucurbit mildew in cucumber: The application is started when the plants start to throw arms or with the first symptoms of mildew and it is continued at 7-10 days intervals depending on the severity of the disease. Applications should be made to cover all parts of the plant, especially under the leaves.
Tomato mildew: It is started to be applied to the chemical struggle with the appearance of white ash under the 3-5 mm diameter brown spots on the tomato leaves or in the places where the disease occurs every year, when the conditions are suitable for the disease. The application is continued at 10-12 day intervals depending on the course of the disease and climatic conditions.
Chickpeas anthracnose:
Seed Application: It should be applied on the day of seed sowing.
Green Parts Application: The application should be started when the daily average temperature is 10oC and the average humidity is at least 80%, but it should be started practically by seeing the first symptoms of the disease in the region. The application is continued taking into account the severity of the disease, climatic conditions and the duration of the crop protection product. If there is heavy rainfall on the day of application, the application should be repeated.
Bean anthracnose: Application should be started with the first signs of disease in the region. The application of the disease is continued, taking into account the climatic conditions and the duration of the mixture. Care should be taken to apply all the green parts of the plant.
Bean rust: Application should be started after the appearance of rust pustules on the leaves of bean plants in the environment and the application should be continued by taking into consideration the severity of the disease, climatic conditions and duration of the mixture. There is no need to apply since the maturation of capsules in dry beans does not cause economic product losses when the disease is seen.
Tomato, eggplant, potato early leaf blight: Application should be started as soon as the first spots appear on both seedlings and field. When the climatic conditions are suitable for the development of the disease, the application is continued at 10-12 day intervals depending on the course of the disease and the climatic conditions.
Root and root rot in vegetable seedlings: Before planting, seeds are mixed with 100 g seeds and 200 g mixture is applied.
Melon-watermelon anthracnose:
Seed application: Before the seeds are soaked for 1 hour and dried for 1 hour, the application is done.
Green component application: If it is necessary to start fighting with the daily average temperature being 16oC and the proportional humidity reaching at least 80%; The most practical way in application should be started with the detection of the first anthracnose spots on the leaves and stems of melon-watermelon plants in the environment. The application should be continued depending on the severity of the disease, climatic conditions and duration of the mixture.
Wheat rust diseases: Yellow rust (Puccinia striiformis), Brown rust (P. recondita tritici), Black Rust (P. graminis tritici) Application should be started when the symptoms are seen. Green parts are applied against rust factors. Application should be done so that the surface of the leaves and stem are covered with mixed water. Applications are continued at intervals of 21-28 days when necessary, taking into account the climatic conditions and the condition of the disease. Application should not be performed since the plant is in the maturation period one month before the harvest.
Hops mildew: In spring, application is started when the shoots are on average 75-100 cm. It is repeated every one week until the flower period. During this period, it is continued at 10-day intervals until the cocoon retention period.
Peanut root collar: It is the application of seeds. The seeds are pre-moistened to hold the mixture on the seed surface.
Peanut leaf spot: The application is started in the places where the disease is seen every year, 4-5 weeks after planting, it can continue until harvest.
INFORMATION ABOUT RESISTANCE:
Plant protection product named MASSCOZEB is a fungicide classified as Group M: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. Therefore, in order to delay the development of resistance, do not exceed the total number of applications recommended by MASSCOZEB in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M: 3).
MIXTURE STATUS:
It can be used by mixing with other insecticides and fungicides, except leaf fertilizers containing sulfur-lime slurry and boron.
It is strictly forbidden to use other than the recommended products.
POISONING SYMPTOMS
Irritation of the eyes, nose, throat and skin, dizziness and pain, weakness, inability to see clearly, nausea.
FIRST AID MEASURES
In case of inhalation; Remove to fresh air, if effects occur, consult a doctor.
In case of Skin Contact; Remove the material that gets on your skin immediately by washing with soap and plenty of water. Take off clothing and shoes while washing. If irritation persists, call a doctor. Wash clothes before reuse.
In Eye Contact; Immediately wash with water, remove contact lenses after the first 5 minutes, if necessary, then continue washing eyes for at least 15 minutes. Preferably seek medical attention from an ophthalmologist without delay.
If Swallowed; If the person can swallow, sip a glass of water. Do not induce vomiting unless recommended by the poison control center or doctor. Never give anything by mouth to an unconscious person.
ANTIDOTE and TREATMENT
It has no special antidote. If necessary, treatment is applied according to the symptoms.
CONTENTS
Mancozeb
HAZARDOUS EXPRESSIONS (H)
H314: Causes severe skin burns and eye damage.
H317: Causes allergic skin reactions.
H361d: Suspected of causing damage to the unborn child.
H400: Very toxic in the aquatic environment.
Precautionary Statements (P)
P202: Do not handle until all precautionary statements are read and understood.
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P391: Collect spillages.
P405: Store locked up.
P501: Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
STORAGE STATUS
When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.
COMPANY STATEMENT
The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47
info@ertarkimya.com.tr www.ertarkimya.com.tr
PLANT AND HAZARDOUS ORGANISMS TO BE USED
| Plant Name | Harmful Organism Name | Administration dose | Time Between Last Application and Harvest |
| Pear | Black stain(Venturia pirina) | 150 g/100 L water | 3 day |
| Apple | Black stain(Venturia İnaequalis) | 150 g/100 L water | 3 day |
| Plum | Pocket disease (Taphrina pruni) | 300 g/100 L water | 3 day |
| Peach | Flower monilya in stone fruits (Monilinia laxa- Sclerotinia laxa) | 300 g/100 L water | 3 day |
| Cherry, sour cherry | Flower monilya in stone fruits (Monilinia laxa- Sclerotinia laxa) | 300 g/100 L water | 3 day |
| Peach, Apricot | Leaf-piercing in stone fruits (Wilsonomyces carpophilus) | 300 g/100 L water | 3 day |
| Citrus | Brown rot and stem gluing in citrus fruits
(Phytophthora citrophthora) |
300 g/100 L water(Meyve enfeksiyonları) | 7 day |
| New World | Black stain
(Venturiainaequalisvar.eriobotryae) |
300 g/100 L water | 3 day |
| vineyard** | Dead Arm(Phomopsis viticola)* | 250 g/100 L su (Yaz uygulaması) | 3 day |
| Downy mildew(Plasmopara viticola) | 300 g/100 L water | 3 day | |
| Vegetable Seedlings ***
|
Root rot (Crashed)
(Phythium spp., Fusarium spp., Rhizoctonia spp., Alternaria spp., Sclerotinia spp., Phytophthora spp.) |
200-250 g/100 L water | — |
| Tomato | Downy mildew(Phytophthora infestans) | 300 g/ 100 L water | 7 day |
| Leaf mold (Cladosporium fulvum) | 250 g/ 100 L water | 7 day | |
| Lettuce | Downy mildew(Bremia lactucae) | 300 g/100 L water | 7 day |
| Onion | Downy mildew(Peronospora destructor) | 300 g/100 L water | 7 day |
| Potato | Downy mildew(Phytophthora infestans) | 350 g/100 L water | 7 day |
| Carnation (Ornamental Plant) | Rust (Uromyces caryophyllus) | 250 g/100 L water | 7 day |
| Tomato | Lead mold in vegetables (Botrytis cinerea) | 250 g/100 L water | 7 day |
| Tobacco (Seedling) | Crash (Phythium spp., Fusarium spp., Rhizoctonia spp., Alternaria spp., Sclerotinia spp.) | 200 g/100 L water | — |
* Used in summer application.
** It is not used in vineyards where harvest leaves will be harvested.
*** Two doses given in seedbed applications; varies according to the disease intensity and vegetation period.
© 2024, Royal Agroscience. All Rights Reserved.
Sosyal Ağ