MATABELE WG

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. Medicated water is added to the tank while the mixer of the machine is running. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF APPLICATION TOOLS:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

USAGE OF PLANT PROTECTION PRODUCT:

VINTAGE ASHTRAY (Erysiphe necator):

1st spraying: When the shoots are 25-30 cm before the flower,

2nd spraying: During the period when flower buds are separated before flowering,

3.Dispositions: During the period when the flower petals are falling and the small pellets of the groves are large,

4. and other sprayings: After the third spraying, depending on the duration of the drug used, the grains are made until I fall.

Cucumber, Pumpkin, Melon and Watermelon Ash: When the first signs of disease are seen, spraying is started. Depending on the severity of the disease, climatic conditions and duration of the drug, disinfection should be continued. Spraying should be interrupted when the daily average temperature is above 27oC and the relative humidity is below 50%.

APPLE SQUARE:

1st spraying: When the flower is blindfolded (3-5 days before where there is a branch heat)

2nd spraying: During the pink rosette bud (when the flowers are seen separately)

3rd spraying: When 70-80% of flower petals are shed

4. and other applications should be applied considering the duration of action of the drugs used when the climatic conditions are suitable for the progression of the disease.

BROWN STAINLESS IN ORANGE (Alternaria alternata f.sp. citri):

Considering the shoot development and climate characteristics, it is started when the shoots begin to develop when they are about 5-10 cm long and when the first signs of disease are seen. Spraying is terminated when the growth of the shoot stops, the precipitation decreases and the temperatures increase and the fruit reaches a diameter of about 4 cm.

INFORMATION ABOUT RESISTANCE:

Plant protection product named MATABELE WG is a fungicide classified as Group C3: 11 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of MATABELE WG recommended in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except for Group C3: 11).

MIXTURE STATUS:

It can be applied by mixing with other fungicides, insecticides and leaf fertilizers, except those of alkali.

• Read the label first.
• Do not use it at home.
• Keep away from children, food and animal feeds.
• Use a mask, protective suit, gloves and goggles.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

POISONING SYMPTOMS:

Although it is low toxicity, it can be used carelessly or if it is swallowed partially, muscle strain, reflex reduction and movements are imbalanced.

ANTIDOTE and TREATMENT:

It has no special antidote. Treatment is applied according to the symptoms.

FIRST AID MEASURES:

AFTER INHALATION: If the product is inhaled, the waste source or the sick person is taken to fresh air. If the patient is unable to breathe, give artificial respiration; give oxygen if it is difficult to breathe. Only qualified personnel can apply oxygen. Get medical attention for any breathing difficulties.

AFTER SKIN CONTACT: Take off contaminated clothing, shoes, and leather goods. Wash the body gently and directly with a little water and non-corrosive soap for 15-20 minutes. If irritation begins to appear, get medical attention.

AFTER EYE CONTACT: Immediately flush eyes with clean water and gently holding eyelids for at least 15 minutes. Remove contact lenses, if present, after the first 5 minutes. Get medical attention when irritation begins to appear.

AFTER SWALLOWING: If the person is sober, gently rinse the mouth. Give the patient some water if he can swallow it. Do not give anything by mouth to the person. Do not induce vomiting unless recommended by the doctor. If vomiting occurs, keep head below hips to prevent aspiration. Get medical attention immediately.

CONTENTS:

I-methyl 1.Kresox

HAZARDOUS EXPRESSIONS (H):

H302: Harmful if swallowed.

H315: Causes skin irritation.

H318: Causes serious eye damage.

H351: Suspected of causing cancer.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P):

P202: Do not handle until all precautionary statements are read and understood.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P301 + P312: IF SWALLOWED: Call the POISON CENTER or doctor / doctor if you feel unwell.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Haci Sabanci Organize Sanayi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED:

(*) It is not used in vineyards where harvesting vine leaves will be harvested.