RESTORER 50 WG

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. Medicated water is added to the tank while the mixer of the machine is running. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Cucurbitaceae (Cucumber): When the first signs of disease are seen, application begins. The application continues depending on the severity of the disease, climatic conditions and the duration of the product. The application should be interrupted when the daily average temperature is above 27 C and its proportional humidity is below 50%.

Ligament Ash: 1.Application: Before the flower, when the shoots are 25-30 cm

Application 2: During the period when flower buds are separated before flowering

3. Application: In the period when the flower petals are falling and the small pellets of the groves are large.

and Other Applications: According to the duration of the product used after the third application, the grains are made until I fall.
Apple pallet: 1. Application When the flower eyes are blistering (3-5 days before where there is a branch heat)

Application During the pink rosette bud (when the flowers are seen separately)
Application When flower petals fall 70-80%
The 4th and the other application should be done in 15 days intervals, if the climatic conditions are suitable for the progression of the disease.

Citrus brown stain: Applications are started when the shoots begin to develop, taking into account about 5-10 cm in length, and when the first signs of disease are seen, taking into account the development of the shoot and the climate characteristics. Applications are continued at 15-20 days intervals, especially in order to protect the newly formed parts of the growing shoots and leaves and young fruit from the disease during the development of the shoot. The applications are terminated when the development of the shoot stops, the precipitation decreases and the temperature increases, and the fruit reaches a diameter of 4 cm.

Paddy blight: In the application of green parts, application should be started as soon as the symptoms of the disease are seen in the region or if the weather conditions are in line with the development of the disease. If necessary, second or third application should be done depending on the duration of the product and weather conditions.

Watermelon alternarya leaf blight: Application should be started with the appearance of the first symptoms in the environment. The application is continued at 7-10 days intervals, taking into account the severity of the disease, climatic conditions and the efficacy of the plant protection product.

Leaf piercing in stone fruits: Application 1: Immediately after leaf fall in autumn,

2.Application: Before the flower buds open in the spring (during the pink flower bud period),

Application: The leaf and male organ plate should be made while peeling the fruit on the tip of the fruit.

INFORMATION ABOUT RESISTANCE:

Plant protection product named RESTORER 50 WG is a fungicide classified as Group C3: 11 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications recommended in the same season of RESTORER 50 WG. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except for group C3: 11).

MIXTURE STATUS:

A pre-mix test is recommended before mixing with other plant protection products.

Do not mix with spreading adhesive and drugs containing methyl parathion.

In the vineyard, mixtures made with Parathion methyl, Chlorpyrifos-ethyl and Cypermethrin-based plant protection products can lightly burn sensitive varieties of young leaves such as Yalova Pearl, Cardinal, Muscule and Perlet.

In apple, mixtures made with plant protection products with parathion methyl composition may cause slight browning and curl in young leaves in early period in sensitive varieties such as Golden.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not put people and animals in the field where plant protection product is applied for 2 hours.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

POISONING SYMPTOMS:

General signs of poisoning may appear. Headaches, dizziness, vomiting, etc.

FIRST AID MEASURES:

After Inhalation: The victim is taken to fresh air and should not be moved. Consult a doctor immediately.

After Skin Contact: Skin should be washed immediately with plenty of water and soap. Consult a doctor immediately.

After Eye Contact: Eyes should be washed immediately with plenty of water. Consult a doctor immediately.

After Swallowing: It should not be vomited. The mouth should be washed with plenty of water. Consult a doctor immediately.

ANTIDOTE and TREATMENT:

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

trifloxystrobin
HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H319: Causes serious eye irritation.

H332: Harmful if inhaled.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH208: Contains Trifloxystrobin and Sodium sulfate. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• Do not pour the remaining plant protection product into wells, pools, fountain troughs and streams.
• Do not use empty plant protection product packages for other purposes.
• The animal should not be grazed in the new application area and pets should be kept away from these.
• It is poisonous to fish, do not contaminate it.
• It is poisonous to the bees, do not use during the flowering period.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdereosb Mahallesi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED

Plant Name	Harmful Organism Name	Administration dose	Time Between Last Application and Harvest
Melon	Powdery mildew in cucurbits (Erysiphe cichoracearum, Sphaerotheca fuliginea)	15 g/100 L water	3 day
vineyard*	Ashing (Erysiphe necator)	10 g/100 L water	35 day
Apple	Karaleke (Venturia inaequalis)	15 g/100 l water	14 day
Citrus	Brown stain (Alternaria alternata f.sp.citri)	20 g/100 L water	28 day
Paddy	Paddy blight (Pyricularia oryzae)	20 g/da	35 day
Watermelon	Alternarya leaf blight (Alternaria cucumerina)	20 g/da	3 day
Apricot	Leaf-piercing in stone fruits (Wilsonomyces carpophylus)	12,5 g/100 L water	14 day
Hazelnut	Hazelnut Ash (Erysiphe sp.)	15 g/ 100 L water	14 day

(*) It is not used in vineyards where harvesting vine leaves will be harvested.