SEMES-T 50 WP

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

Potatoes: Seed potatoes are spread on a flat surface. The recommended amount of the drug for 100 kg seed is added to 1 - 1.5 l of water in a bucket and mixed well and transferred to the sprayer. The prepared mixture is first sprayed on the seed potatoes and the potatoes are turned inside out with a shovel. Then spraying is completed by spraying the remaining half of the product. The matter to be considered in the application is that the amount of water is enough to wet the seed but not flow. Planting can be done immediately after spraying, and after the moisture of the seeds dries, it can be waited for several days by sacking or pouring. Rubber gloves should be worn during spraying and sewing.

Cotton, Peanut: Seed application can be done with a rotary application drum or seed application machine that works with the spray principle. In the absence of suitable equipment, the seeds are spread on a flat surface and applied in a way to provide a homogeneous coating. It is recommended to repeat the seeder setting with the medicated seed before planting, as the sprayed seed can change the previous seeder setting. After use, the application tool should be thoroughly cleaned.

HOW TO USE THE PLANT PROTECTION PRODUCT:

If the application is to be applied with the cask (cascade), 150 g of the product recommended for 100 kg of seeds are added to the application barrel several times in a container after mixing well with enough water in a container. coating is provided.

On the other hand, the selectors with application equipment contain the amount of water that will ensure the ideal coating of the seed by conducting a preliminary trial. The ideal amount of water is the amount of water that covers the seed but does not flow. After this is achieved, the required amount is mixed thoroughly with water and the application device is placed in the tank and applied. Do not use seeds with low germination capacity, peeled or cracked, not suitable for planting. Seed application equipment can be a problem at temperatures below very cold (0 ° C). (SEMES-T 50 WP) should be applied at temperatures above 0 ° C.

INFORMATION ABOUT RESISTANCE:

The plant protection product named SEMES-T 50 WP is a fungicide classified as Group M3– F3: 14 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended in the same season of SEMES-T 50 WP. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M3– F3: 14).

MIXTURE STATUS:

It is not used by mixing with any plant protection product because it is a seed medicine.

• Read the label first.
• Do not use it at home.
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

POISONING SYMPTOMS

Nausea, vomiting, impaired motor activity, central nervous system depression, low blood pressure, flushing, sweating, difficult breathing, respiratory failure.

FIRST AID MEASURES

In case of inhalation; Move from the contaminated area to the clean area. If any symptoms occur and persist, consult a doctor.

In case of Skin Contact; Immediately take off the contaminated clothing. Wash the body parts of the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

In Eye Contact; Immediately flush eyes and under eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

If Swallowed; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS:

Thiram, Tolclofos methyl

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H314: Causes severe skin burns and eye damage.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H332: Harmful if inhaled.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P260: Emits flammable gases that can ignite spontaneously when in contact with water.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P405: Store locked up.

P501 Dispose of contents / container in accordance with local regulations.

EUH208: Contains Tolclofos-methyl and Thiram. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to the fish. Do not contaminate it in all kinds of water and water resources.
• Empty plant protection product packages that have been used for other purposes.
• Do not use.
• It is poisonous to bees. Do not use during the flowering period.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT:

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for damage caused by improper storage of plant protection products or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: